Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Front Headlamp

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Headlight

To carry out this operation and access the headlamp socket, it is necessary to remove some body parts and the headlamp itself. Remove the fixing bolts of the front wing. Detach and remove the front grille, taking care not to break the plastic clips. Next, unscrew the fixing bolts of the headlamps and pull them out of their housing to replace the old bulbs. To extract the old bulb, simply unclip the fixing pin. Once everything is confirmed to be working, reassemble all parts.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb
Replacing the Front Headlamp Bulb
Chrysler Pt Cruiser (2000-2010 / MK 1) To access the front headlamp bulb, you need to reach through the wheel arch: turn the front wheel fully to gain more working space, locate the cover …
How to Replace the Front Headlamp Bulbs on a Chrysler PT Cruiser
How to Replace the Front Headlamp Bulbs on a Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) First, release the bonnet from the catch and lift it. Next, remove the bolts indicated in the video on the top of the bumper. You will also need to u…
Front Headlamp Bulb Replacement and Headlamp Removal
Front Headlamp Bulb Replacement and Headlamp Removal
Chrysler Pt Cruiser (2000-2010 / MK 1) If possible, lift the vehicle on a hydraulic lift and remove the front wheel to facilitate disassembly. Along the wheel arch, you will see a cap tha…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos