Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulbs on a Chrysler PT Cruiser

Model: Chrysler Pt Cruiser MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

Video tutorial

First, release the bonnet from the catch and lift it. Next, remove the bolts indicated in the video on the top of the bumper. You will also need to unscrew the screws that secure the bumper from the inside of the wing, allowing you to access the screws that hold the back of the headlamp.

By unscrewing these, you can detach the bumper and also release the headlamp for removal from the front. Disconnect the connectors at the back and, by removing the protective caps on the back of the headlamp, you can carry out the necessary replacements.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs in a Chrysler PT Cruiser?
How to Replace the Headlight Bulbs in a Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) In this tutorial, see how to replace the headlight bulbs in a Chrysler PT Cruiser, a very simple and quick operation. First, ensure the key is not in…
Where are the fuses located in the Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) The fuses of the Chrysler PT Cruiser are divided inside the appropriate fuse boxes that are installed on the vehicle: on this car model, two can be i…
Where are the fuses located in the Chrysler PT Cruiser?
Where are the fuses located in the Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) The fuses of the Chrysler PT Cruiser are located inside the only fuse box situated within the engine compartment: this will be found on the right sid…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos