Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb

Model: Chrysler Pt Cruiser MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

Video tutorial

To access the front headlamp bulb, you need to reach through the wheel arch: turn the front wheel fully to gain more working space, locate the cover on the wheel arch corresponding to the headlamp, and remove it. At this point, you can detach the complete bulb holder with the bulb (bayonet fitting), disconnect the connector, and install the new bulb by reversing the steps; ensure the bulb fits correctly in the headlamp socket to avoid water ingress and condensation.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacing Front Headlight Bulb
Replacing Front Headlight Bulb
Chrysler Pt Cruiser (2000-2010 / MK 1) To replace the front headlight bulb, it is necessary to remove the headlight itself, which also requires removing the front bumper: first, open the f…
Replacing the Front Headlamp Bulb on a Chrysler Pt Cruiser
Replacing the Front Headlamp Bulb on a Chrysler Pt Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In today's video tutorial, you will see how to remove and replace the front headlamp bulb on a Chrysler Pt Cruiser. First, you need to know that to a…
Front Headlamp Bulb Replacement and Headlamp Removal
Front Headlamp Bulb Replacement and Headlamp Removal
Chrysler Pt Cruiser (2000-2010 / MK 1) If possible, lift the vehicle on a hydraulic lift and remove the front wheel to facilitate disassembly. Along the wheel arch, you will see a cap tha…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos