Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulb

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Headlight bulb

To replace the front headlight bulb, it is necessary to remove the headlight itself, which also requires removing the front bumper: first, open the front bonnet, unscrew the screws at the edge of the headlight, and detach the wheel arch liners to access the screws underneath; once the bumper is removed, you can access the headlight fixing pins (which are not easy to reach) and remove them to detach the headlight from its housing; once the headlight is removed, you can comfortably proceed with replacing the bulbs: due to the complexity of the disassembly, it is advisable to replace the bulbs of both headlights.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb
Replacing the Front Headlamp Bulb
Chrysler Pt Cruiser (2000-2010 / MK 1) To access the front headlamp bulb, you need to reach through the wheel arch: turn the front wheel fully to gain more working space, locate the cover …
Replacing the Front Headlamp Bulb on a Chrysler Pt Cruiser
Replacing the Front Headlamp Bulb on a Chrysler Pt Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In today's video tutorial, you will see how to remove and replace the front headlamp bulb on a Chrysler Pt Cruiser. First, you need to know that to a…
Front Headlamp Bulb Replacement and Headlamp Removal
Front Headlamp Bulb Replacement and Headlamp Removal
Chrysler Pt Cruiser (2000-2010 / MK 1) If possible, lift the vehicle on a hydraulic lift and remove the front wheel to facilitate disassembly. Along the wheel arch, you will see a cap tha…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos