Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on a Chrysler Pt Cruiser

Model: Chrysler Pt Cruiser MK 1 - Years 2000-2010
Part: Headlight bulb

In today's video tutorial, you will see how to remove and replace the front headlamp bulb on a Chrysler Pt Cruiser. First, you need to know that to access the bulb, you do not need to go from the engine bay, but from the wheel side: turn the wheel fully to one side and remove the plastic cover located in the wheel arch. Then disconnect the electrical connector of the bulb and pull it out along with the bulb holder; pull to remove it and replace it with a new one. Now refit it in position and reassemble everything.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulbs on a Chrysler PT Cruiser
How to Replace the Front Headlamp Bulbs on a Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) First, release the bonnet from the catch and lift it. Next, remove the bolts indicated in the video on the top of the bumper. You will also need to u…
Where are the fuses located in the Chrysler PT Cruiser?
Where are the fuses located in the Chrysler PT Cruiser?
Chrysler Pt Cruiser (2000-2010 / MK 1) The fuses of the Chrysler PT Cruiser are located inside the only fuse box situated within the engine compartment: this will be found on the right sid…
Removing the Water Pump from a Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In this video tutorial, you will see the main steps to remove the water pump from a Chrysler PT Cruiser. Start by removing the front right wheel and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos