Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the key fob battery for the Chrysler PT Cruiser.

Model: Chrysler Pt Cruiser MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Key

Video tutorial

Today we will look at the instructions that will show us how to disassemble and replace the battery in the key fob of the Chrysler PT Cruiser. First, let's take our remote in hand and start prying at the side slot using a thin, pointed tool; this way, we will gain access to the circuit board and the battery, as shown in the video.

At this point, let's remove the old battery and replace it with a new one of the correct type and with the same designation; insert it in the correct orientation and reassemble the remote, checking its functionality.


Posted on 3 December 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Chrysler PT Cruiser
How to Replace the Key Battery on a Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) The smart key for your Chrysler PT Cruiser has a very minimalist and simple external and internal structure. This greatly facilitates its disassembly…
How to remove the car radio from the Chrysler PT Cruiser
How to remove the car radio from the Chrysler PT Cruiser
Chrysler Pt Cruiser (2000-2010 / MK 1) In this short guide, we will see the instructions that will allow us to disassemble and replace the factory radio of the Chrysler PT Cruiser. First, …
2006 PT Cruiser Fuse Box Manual and Diagram
2006 PT Cruiser Fuse Box Manual and Diagram
Chrysler Pt Cruiser (2000-2010 / MK 1) This video shows the location of the fuse box for the 2006 Chrysler PT Cruiser, which is situated in the engine compartment on the driver's side abov…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos