Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Ds3
  6. : Blower motor

Citroen Ds3 - Blower motor

Blower Motor Citroen Ds3 (2010-2019 / mk 1)

Citroen Ds3 (2010-2019 / MK 1)
How to Fix the Always Maximum Fan Issue on Citroen DS3

The problem is that the air conditioning fan runs at maximum speed, regardless of the setting selected on the control panel, even if it appears to be off. The …Read all…
Posted on 17 April 2026 by ScegliAuto
Citroen Ds3 (2010-2019 / MK 1)
How to replace the fan resistor of the DS3

In this video, we see how to replace the blower resistor of a Citroen DS3: the problem is that the fan only works at maximum speed, while at intermediate …Read all…
Posted on 24 February 2025 by ScegliAuto
Citroen Ds3 (2010-2019 / MK 1)
Replacing the Cabin Fan Resistor on a Citroen DS3

Today, we will go through the steps to remove and replace the cabin fan resistor on the Citroen DS3. First, get inside the cabin and begin by removing the …Read all…
Posted on 10 September 2026 by ScegliAuto

Airbag (3) Speaker (1) Shocks (1) Car stereo (3) Battery (4) Air vents (1) Transmission (1) Convertible top (1) Body (3) Control unit (1) Key (16) Timing belt (1) Air conditioner (1) Onboard computer (4) Checks and maintenance (3) Dashboard (4) Brake rotors (1) Tail light (3) Air filter (4) Cabin air filter (3) Fuel filter (1) Diesel fuel filter (4) Accessory kit (2) Light bulb (2) Headlight bulb (9) Tail light bulb (2) Engine (1) Clock (12) Door trim panel (3) Front bumper (3) Instrument cluster (4) Fuse box (17) Suspension system (1) Side mirror (2) AdBlue warning light (1) Warning light – error code (2) (9) Tire pressure warning light (3) Service warning light (36) Manufacturer emblem (1) Windshield wipers (1) Center console tunnel (1) Blower motor (3) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos