Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan Resistor on a Citroen DS3

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Blower motor

Today, we will go through the steps to remove and replace the cabin fan resistor on the Citroen DS3. First, get inside the cabin and begin by removing the lower panel of the dashboard. Then, rotate the cabin fan to remove it, disconnecting the power connector as shown in the video. At this point, disconnect the resistor from the cabin fan and replace it with the new original part; reconnect it and refit the cabin fan, testing its operation at various speeds.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Fan Resistor on Citroen DS3
Replacing the Cabin Fan Resistor on Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) In today's video, you will see instructions on how to remove and replace the cabin fan resistor on a Citroen DS3. First, get inside the car and from …
How to replace the fan resistor of the DS3
How to replace the fan resistor of the DS3
Citroen Ds3 (2010-2019 / MK 1) In this video, we see how to replace the blower resistor of a Citroen DS3: the problem is that the fan only works at maximum speed, while at intermed…
How to Fix the Always Maximum Fan Issue on Citroen DS3
How to Fix the Always Maximum Fan Issue on Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) The problem is that the air conditioning fan runs at maximum speed, regardless of the setting selected on the control panel, even if it appears to be…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos