Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan Resistor on Citroen DS3

Model: Citroen Ds3 MK 1 - Years 2010-2019

In today's video, you will see instructions on how to remove and replace the cabin fan resistor on a Citroen DS3. First, get inside the car and from the passenger compartment, remove the fixing screw of the lower plastic cover using a Torx spanner; then remove the fan resistor by disconnecting its electrical connector. Simply replace it with the new one and insert it back into the compartment. Reassemble everything and check the fan operation by turning on the heater or air conditioning!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Bulbs on Citroen DS3
Replacing Front Bulbs on Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) Open the bonnet and insert the support rod. Replacing the front bulbs on this model is extremely simple and quick, unlike many other models where eve…
How to replace the front headlight bulb of the Citroen DS3
How to replace the front headlight bulb of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) If one of the bulbs in the front headlight of your Citroen DS3 has suddenly stopped working and you want to find out how to replace it correctly, the…
Replacing the Diesel Filter on the Citroen DS3 1.6 HDI
Replacing the Diesel Filter on the Citroen DS3 1.6 HDI
Citroen Ds3 (2010-2019 / MK 1) In this video tutorial, you will learn how to remove and replace the diesel filter on the Citroen DS3 1.6 HDI by following these simple steps. First,…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos