Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the dashboard components of the Citroen DS3

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Dashboard

Below we will see the instructions that will allow us to disassemble the components of the Citroen DS3 dashboard. First, we climb aboard the vehicle and start by removing the plastic cover of the air conditioning controls; we disconnect the electrical wiring to remove them, as shown in the video. At this point, we use the appropriate extraction tools to remove the radio, also disconnecting the wiring in this case; then we remove the plastic cover of the dashboard and the air vents, later removing the entire dashboard if necessary!

Posted on 2 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the central dashboard cover of the Citroen DS3
How to remove the central dashboard cover of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) In this guide we will see the steps that will allow us to disassemble and remove the central dashboard cover and the air vents on the Citroen DS3. Fi…
Removing the Radio from Citroen DS3
Removing the Radio from Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) In today's tutorial, learn how to remove the radio from a Citroen DS3 in simple steps without special tools, except for the specific removal keys for…
Replacement of the front suspension of the Citroen DS3.
Replacement of the front suspension of the Citroen DS3.
Citroen Ds3 (2010-2019 / MK 1) Below we will discover all the instructions that will illustrate the procedure for disassembling and replacing the front suspensions and springs of t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos