Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front suspension of the Citroen DS3.

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Suspension system

Below we will discover all the instructions that will illustrate the procedure for disassembling and replacing the front suspensions and springs of the Citroen DS3. First, we lift the vehicle and begin to disassemble and remove the front wheel; then we proceed to unscrew the suspension bolts, located at the top and bottom, as shown in the video. We disconnect the suspension arm by detaching it from the control arm; in this specific case, only the replacement of the suspension spring is performed, replacing the entire front suspension if necessary.

Posted on 24 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Remove the Front Bumper of the Citroen DS3
Guide to Remove the Front Bumper of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) This guide explains how to remove the front bumper of the Citroen DS3, following the instructions below. First, open the bonnet and unscrew the screw…
How to replace the front headlight bulb of the Citroen DS3
How to replace the front headlight bulb of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) If one of the bulbs in the front headlight of your Citroen DS3 has suddenly stopped working and you want to find out how to replace it correctly, the…
How to Replace the Front Headlight Bulb on a Citroën DS3?
How to Replace the Front Headlight Bulb on a Citroën DS3?
Citroen Ds3 (2010-2019 / MK 1) To replace the front headlight bulb on a Citroën DS3, open the bonnet and access the back of the headlight, where there is a circular plastic cover t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos