Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Citroen C3 windshield wiper blades

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Windshield wipers

Today we will explain how to replace the windshield wiper blades of a Citroen C3. We start by positioning the blades vertically. We continue the replacement of the blades by lifting the clips that lock the blade to the movement mechanism so that we can remove the blade from the arm. We then pull the blade outwards. We conclude by inserting the new blade into the mechanism. We follow the same steps on the right blade and then on the rear one. Remember that the blades should always be replaced at least once a year and always at the same time.

Posted on 6 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to put the windscreen wipers of the Citroen C3 III in maintenance position
How to put the windscreen wipers of the Citroen C3 III in maintenance position
Citroen C3 (2016-2023 / SY, SX) In this video, we will see how to put the windshield wipers of the Citroen C3 version III in maintenance position, in order to be able to perform all…
How to Replace the Front Wiper Blade of the Citroen C3
How to Replace the Front Wiper Blade of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Below are the instructions for removing and replacing the front wiper blades of the Citroen C3. First, move to the front of the vehicle and begin lif…
Guide to replacing the Citroen C3 windshield washer pump
Guide to replacing the Citroen C3 windshield washer pump
Citroen C3 (2002-2009 / FC, FN) Below we will see the instructions that will allow us to disassemble and replace the windshield washer pump of the Citroen C3. First of all, we lift …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos