Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" indicator on a Citroen C3 Picasso?

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Service warning light

To reset the "Service" light on a Citroen C3 Picasso, proceed as follows: make sure the engine is off and insert the key into the instrument panel. Press and hold the button located under the instrument panel. Keep the button pressed while turning on the instrument panel without starting the engine. Continue to hold the button for about 10 seconds until a reset message appears on the console. Release the button and the "Service" light should be reset. Make sure you have followed the steps correctly and consult the owner's manual for specific instructions.

Posted on 12 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Citroën C3 Picasso?
How to Reset the Tyre Pressure Light on a Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) You can completely clear the Service light on the Citroën C3 Picasso by inflating the tyres to the optimal pressure value: this value is indicated on…
How to Reset the Service Light on a Citroën C3 Picasso?
How to Reset the Service Light on a Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) To reset the Service light on a Citroën C3 Picasso, press and hold the pedal on the left side of the display in the centre of the dashboard. While ho…
How to reset the service light on the Citroen C3 Picasso
How to reset the service light on the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Resetting the service light is necessary to continue driving smoothly with the vehicle, but it is important that it is done after completing all the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos