Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Programming the Key Remote for the Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Key

This video shows how to program the key remote for the Citroen C3 Picasso. To program the remote, you will need the old physical key and a programming tool, in this case, the xtool; connect your tool to the OBD port. Next, insert the second key and turn on the ignition; follow the steps indicated to program the remote, entering the make, model, and engine type. Finally, check the remote's functionality on the vehicle!

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Key Battery on Citroen C2, C3 Picasso
Replacing the Key Battery on Citroen C2, C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) In this video tutorial, you will learn how to dismantle and replace the battery in the key for various Citroen models, particularly the C2 and C3 Pic…
How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the tailgate of your Citroen C3 Picasso. Begin by unscrewing and removing the screws that secure the rear light to its housing.…
Where is the OBD port located in the Citroen C3 Picasso?
Where is the OBD port located in the Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) If you don't know where the OBD port of your Citroen C3 Picasso is located, then all you have to do is read the following guide and follow the few si…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos