Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear bumper of the Citroen Amii

Model: Citroen Citroen Various
Part: Rear bumper

In this video we can see how to remove the bumper of the Citroen Amii. Obviously, the car must be turned off, the handbrake engaged, and it must not be charging. We will need to remove the cover of the bolt located at the top, another one is inside, then there are two bolts at the bottom of the vehicle. First, we unhook the license plate light from the inside, pressing it and then pushing it outwards, then disconnect the connector. Now from the covers we opened at the top, slide back a kind of sled and then disconnect the rear lights. To put it back in place, we will follow the reverse procedure, starting with reconnecting the lights, then sliding the sled, reconnecting the license plate lights and putting all the bolts back in place.

Posted on 30 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear light of a Citroen van
How to remove the rear light of a Citroen van
Citroen Citroen Various In this video, we can see how to disassemble the rear headlight of a Citroen Relay, which also damaged the rear bumper in the corner. The headlight a…
How to Remove the Front Bumper on a Citroen Ami
How to Remove the Front Bumper on a Citroen Ami
Citroen Citroen Various To remove the front bumper on this car model, follow the simple procedure outlined below along with the corresponding steps. The first step is to rem…
Removing the Rear Light and Bulbs of the Citroen C4 Grand Picasso
Removing the Rear Light and Bulbs of the Citroen C4 Grand Picasso
Citroen Citroen Various This guide provides instructions to remove and replace the rear light and its bulbs on the Citroen C4 Grand Picasso. First, open the boot and start r…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos