Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Lights on the Citroen C4 Grand Picasso

Model: Citroen Citroen Various
Part: License plate light

Here are the instructions for removing and replacing the number plate lights on the Citroen C4 Grand Picasso in simple, quick steps. First, open the tailgate of the boot and disconnect the electrical connector from the interior light; then remove the light unit and replace the bulb inside, as shown in the video. Now, install the new bulb with the same fitting, reassemble the light unit onto the tailgate, and reconnect the electrical connector!

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light and Bulbs of the Citroen C4 Grand Picasso
Removing the Rear Light and Bulbs of the Citroen C4 Grand Picasso
Citroen Citroen Various This guide provides instructions to remove and replace the rear light and its bulbs on the Citroen C4 Grand Picasso. First, open the boot and start r…
How to Replace the Rear Shock Absorbers on the Citroen C4 Grand Picasso
How to Replace the Rear Shock Absorbers on the Citroen C4 Grand Picasso
Citroen Citroen Various Follow these instructions to remove and replace the rear shock absorbers on the Citroen C4 Grand Picasso. First, lift the vehicle and start by removi…
How to replace the key battery on a Citroen Xsara Picasso, Berlingo, and Saxo vehicle
How to replace the key battery on a Citroen Xsara Picasso, Berlingo, and Saxo vehicle
Citroen Citroen Various Today we will explain how to replace the battery and microchip of the key on a Citroen Berlingo, Saxo, and Xsara Picasso car by yourself. The first s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos