Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Citroen Ami

Model: Citroen Citroen Various
Part: Body

To remove the front bumper on this car model, follow the simple procedure outlined below along with the corresponding steps. The first step is to remove the plastic panel located just above the side of the bumper. Use a socket wrench to unscrew the screw located just underneath. Then, locate the screw fastening the bumper to the front wing inside the wheel arch. Proceed to remove these two screws as well, which will free the bumper from the rest of the bodywork. At this point, be careful to disconnect all the clips located behind, and the job will be complete.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the license plate light of the Citroen Ami
How to replace the license plate light of the Citroen Ami
Citroen Citroen Various If you own a Citroen Ami and need to replace the license plate light, all you have to do is read the following instructions and put them into practic…
Accessories to enhance the Citroen Ami
Accessories to enhance the Citroen Ami
Citroen Citroen Various In this video we see where to get various accessories to enrich your Citroen Ami. In fact, the car is a bit bare as standard, and there is a need to …
How to recharge the Citroen Ami without adapters
How to recharge the Citroen Ami without adapters
Citroen Citroen Various In this video we can see how to recharge our Citroen Ami with a simple Shuco socket, without any adapter: the charging cable is well positioned in a …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos