Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Citroen Berlingo?

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Service warning light

To reset the "Service" light on a Citroen Berlingo, start by turning on the instrument panel without starting the vehicle. Locate the button underneath the panel and hold it down for a few seconds until the maintenance menu appears on the display. From there, navigate through the available options using the same button, looking for the setting that allows you to reset the service reminder. Once selected, follow the instructions that appear on the screen to confirm the reset. The system will take a moment to complete the operation and turn off the light. To verify that the reset was successful, turn off and turn on the instrument panel. If the message does not reappear, the procedure has been carried out correctly, allowing the vehicle to record the new maintenance intervals.

Posted on 16 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Citroen Berlingo?
How to reset the "Service" light on a Citroen Berlingo?
Citroen Berlingo (1996-2013 / MK 1) To reset the "Service" light on a Citroen Berlingo, start by sitting in the driver's seat. Then, proceed by turning on the car's ignition by simply t…
How to Reset the Service Light on a Citroën Berlingo?
How to Reset the Service Light on a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To reset the service light on a Citroën Berlingo, turn on the instrument panel and press the button located on the right side of the panel. While hol…
How to Reset the Service Light on a Citroen Berlingo
How to Reset the Service Light on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) When the service light comes on in a Citroen Berlingo, first perform the vehicle service and then reset the light. The reset procedure is quick and e…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos