|
Do it yourself
| |||
| ||||
How to change the cabin filter of the Citroen C4 Picasso
Model: Citroen C4 Picasso
MK 1
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
In this video, we see how to change the cabin air filter of the Citroen C4 Picasso: the cabin filter is located in the upper part of the footwell on the right side of the front, so on the passenger side for left-hand drive cars. Using a socket screwdriver, we remove the screw holding the side panel of the console. Then, using a spatula, we remove the three clips under the glove compartment. At the bottom of the footwell, on the left side, we find a plastic screw that holds the lower part of the dashboard: this is a single piece that we can now remove all together. On the left side, we remove the cover of the compartment where the filter is located, then the filter which is made up of two parts. We clean the container from dust and debris before putting the new filter in place, paying attention to the direction of assembly. We put the cover back in place and then reassemble the partition we had previously removed, putting all the screws and clips back in place.
Posted on 9 July 2025 by ScegliAuto
Related tutorials
Citroen C4 Picasso
(2006-2013 /
MK 1)
If you are unsure how to replace the cabin air filter in your first-generation Citroen C4 Picasso, don't worry as we will explain how to do it. First…
Citroen C4 Picasso
(2006-2013 /
MK 1)
To replace the cabin filter on the Citroën C4 Picasso, loosen the screws securing the plastic panel located directly under the glove compartment on t…
Citroen C4 Picasso
(2013-2022 /
MK 2)
In this tutorial, you will see how to replace the cabin filter in the Citroen C4 Picasso, a very simple and quick operation. First, open the bonnet, …
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.090
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |