Do it yourself
Frequently asked questions about cars and motorcycles

Intermittent overheating problem of a Citroen C3

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Blower motor

See other generations:
Video tutorial

In this video we see a Citroen C3 with a Puretech engine, where for once the problem was not the oil-soaked belt, but the fan. The car was overheating intermittently, especially in stationary or low-speed conditions. The YouTuber noticed a physical blockage at the cooling fan: a clamp stuck between the fan blades, preventing it from rotating! Obviously, the fan showed signs of wear due to prolonged rubbing.

Fortunately, other engine components, such as the belt and water pump, did not suffer from this problem, as well as the coolant level. The fuse was intact, but the fan motor was burnt out, as was the fan control resistor.

It was therefore necessary to replace the fan and the resistor. Both parts can be found on eBay: the fan with code 127153954842 for 77.16 euros + 3.10 euros for shipping, while the complete wiring resistor with code 326321994548 for 29.90 euros + 4.90 euros for shipping.

The stuck clamp caused abnormal stress on the fan motor, burning it out. The resistor was damaged because it tried to turn the fan despite the obstacle. Fortunately, the engine did not suffer any damage! We should find out who left a tool in the engine and ask them to pay for the damages!


Posted on 17 July 2025 by ScegliAuto


Related tutorials

Citroen C3 (2009-2016 / SC) In this video, the issue of Citroen cars with defective airbags is explained, with approximately 600,000 units affected in Italy alone, produced sinc…
Citroen C3 (2009-2016 / SC) In this tutorial, you will see how to replace the dipped beam bulbs in a Citroen C3, a very simple and quick operation. First, ensure the key is not …
Citroen C3 (2002-2009 / FC, FN) In this video, we see how the youtuber identified the problem with his 2006 Citroen C3, hoping to help anyone who may have had a similar issue with t…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos