Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator on the Citroen Jumper 2004

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Service warning light

If you own a first series Citroen Jumper (year 2004) and want to manually reset the oil light, just follow the following guide and apply what is described. First of all, start the instrument panel and press the button below the tachometer several times until the display shows the total mileage. At this point, hold down the same button until a new screen appears. Set the "CGF" option to 1 and then hold down the same button again and you're done.

Posted on 4 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Citroen Jumper III
How to Reset the Service Light on a Citroen Jumper III
Citroen Jumper (2014-2024 / MK 3) Let's see how to reset the service light on a Citroen Jumper Mk III. After completing the required services from the service schedule, get in the veh…
How to Reset the Service Light on a Citroen Jumper
How to Reset the Service Light on a Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) To reset the service light on the Citroen Jumper, get in the vehicle and turn on the ignition without starting the engine. Use the controls on the st…
How to reset the service indicator on the 2017 Citroen Jumper
How to reset the service indicator on the 2017 Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) If you want to manually reset the service light on your 2017 Citroen Jumper, you must follow the procedure described in this new guide. First of all,…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos