Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the measurement unit of the speedometer in the Citroen C3.

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Instrument cluster

In the following guide, we will explain how you can switch from km/h to mph and vice versa on the instrument panel of your first-generation Citroen C3. First, you need to get into the car and start the instrument panel. Then, locate the button on the right side of the panel and hold it down for a few seconds. Once the display starts to flash, release the button and then press it again to change the unit of measurement. Once you have set your preferred unit of measurement, hold the button down to save the changes, and the procedure is complete.

Posted on 17 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the display from kilometers to miles on a Citroen C3
How to change the display from kilometers to miles on a Citroen C3
Citroen C3 (2009-2016 / SC) In this video we see how to change the indication on the speedometer of a Citroen C3 from kilometers to miles and vice versa. On the sides of the spe…
How to Change the Units on the Citroen C3 Display
How to Change the Units on the Citroen C3 Display
Citroen C3 (2009-2016 / SC) In this video, learn how to change the units on the Citroen C3 display. On the left side of the screen, there are three buttons: the central one is f…
How to Change the Temperature Units on a Citroen C3
How to Change the Temperature Units on a Citroen C3
Citroen C3 (2009-2016 / SC) In this video, you will learn how to change the temperature units on a Citroen C3. From the onboard computer, go to the 'Menu' button and then to 'Se…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos