Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Sensors on a Citroen C4

Model: Citroen C4 MK 3 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part:

Video tutorial

Let's see how to reset the tyre pressure sensors on a Citroen C4: press the "car" icon on the touch screen and select "inflation initialisation" from the menu. This operation must be done after checking the pressure of all four tyres, comparing them with the label on the driver's door pillar, from which you can obtain the recommended pressures from the manufacturer.

Confirm with a "yes" on the screen. Then, simply drive for a few miles for the system to recalibrate to the current tyre pressures: it is necessary for them to be inflated to the correct pressure.


Posted on 30 April 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure warning on the Citroen C4 Cactus
How to reset the tire pressure warning on the Citroen C4 Cactus
Citroen C4 (2014-2020 / Cactus) Following the instructions in this guide, we will see how to reset the tire pressure warning light on the Citroen C4 Cactus; before resetting the TPM…
Resetting the tire pressure warning light of the Citroen C4 Cactus
Resetting the tire pressure warning light of the Citroen C4 Cactus
Citroen C4 (2014-2020 / Cactus) Today's information will allow us to reset the tire pressure warning light on the Citroen C4 Cactus; before resetting the TPMS sensors, it is necessa…
How to reset the tire pressure sensor on the Citroen C4
How to reset the tire pressure sensor on the Citroen C4
Citroen C4 (2020-2026 / MK 3) In a few simple steps, we will see how to reset the tire pressure warning light on the Citroen C4; before resetting the TPMS sensors, it is necessary…

How to Remove the Rear Bumper on a Peugeot 308

This article outlines the procedure to remove and replace the rear bumper on a Peugeot 308 T9. First, remove the screws located in the wheel arch of the rear wheels, then remove the plastic clips underneath the bumper. Next, take off the wheel arch cover, and remove the plastic nut. After removing the nut, disconnect the connectors present. Now, remove the fixing screws located underneath the bumper and also the plastic clips. Once all clips and screws are removed, you can take off the bumper for repair or replacement.

Watch the video!


by ScegliAuto

More videos