Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the On-Board Computer of the DS5 (Trip Data)

Model: Citroen Ds5 MK 1 - Years 2011-2019
Part: Onboard computer

To reset the on-board computer of the DS5: the procedure described in the video refers to resetting the trip computer (trip data) and is done after filling up with fuel or at the start of a long journey to measure average consumption and distance. Go to the "trip 1" or "trip 2" screen and press and hold the "OK" or "validate" button on the stalk (this depends on the version) for a few seconds. The data will reset. It is advisable to distinguish "trip 1" to monitor the data of a single journey, while "trip 2" can be used to check fuel consumption data from a full tank or a longer trip.

Posted on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the onboard computer of the DS5
How to reset the onboard computer of the DS5
Citroen Ds5 (2011-2019 / MK 1) .. Let's see how to reset the on-board computer data of the DS 5, which refer to the data of the individual trip,.. …
Fuse box diagram and positioning of the fuses in the Citroen DS5.
Fuse box diagram and positioning of the fuses in the Citroen DS5.
Citroen Ds5 (2011-2019 / MK 1) Let's see the information that will allow us to identify the layout and positioning of the fuse boxes of the Citroen DS5. First, we get on board the …
Where is the OBD2 port located in the Citroen DS5?
Where is the OBD2 port located in the Citroen DS5?
Citroen Ds5 (2011-2019 / MK 1) If you want to have access to the OBD2 port located inside your Citroen DS5, all you have to do is follow the steps described below. First, enter the…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos