Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on a Citroen C3

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

See other generations:
Video tutorial

How to replace the fan resistor on a Citroen C3? Follow these steps for disassembly. Remove the glove compartment from the dashboard using a lever, then unscrew the securing screws on the side with a screwdriver.

Remove the plastic cover from the resistor compartment; disconnect the large connector of the resistor, then extract it from the cabin. Insert a new fan resistor (connect the power connector).

Finally, reassemble the glove compartment and tighten the screws. Check the correct assembly of the parts and test their proper functioning.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Fan Resistor in a Citroen C3
How to Remove and Replace the Fan Resistor in a Citroen C3
Citroen C3 (2002-2009 / FC, FN) This short video shows you how to remove and replace the air conditioning fan resistor in a Citroen C3 (the procedure is similar for many other makes…
How to Replace the Cooling Fan Resistor in a Citroen C3
How to Replace the Cooling Fan Resistor in a Citroen C3
Citroen C3 (2002-2009 / FC, FN) To replace the cooling fan resistor on a Citroen C3, first disconnect the negative terminal of the battery, then locate the resistor module connected…
How to Replace the Cabin Fan Resistor on a Citroen C3
How to Replace the Cabin Fan Resistor on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) If the cabin fan only activates at maximum speed despite adjusting the speed, the resistor (i.e., the controller) that regulates the fan motor's rota…

How to open the fuel flap of the Toyota Aygo?

The fuel flap of the Toyota Aygo can be opened by pulling the dedicated button located on the dashboard, on the left side of the steering column: this button should now be pulled upwards. This will unlock the mechanism that allows the flap to close, making it possible to open the fuel flap. You can then unscrew the cap underneath and refuel: after refuelling, reposition the cap and close the flap again.

Watch the video!


by ScegliAuto

More videos