Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wiper Blades on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Windshield wipers

Let’s see how to replace the front wiper blades on a Citroen C3. Take the front blade, gently pull the movable blade as shown in the video, and slide it off the arm on the left. Fit the new blade onto the arm (if the blade is not original, you need to remove the piece), you will hear a click indicating it is securely attached. Lower the wiper arm onto the windscreen and perform the same operation on the second blade. Test the new blades installed. It is always preferable to use original parts for better durability and quality.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Wiper Blades on a Citroen C3
Removing the Wiper Blades on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Removing the front wiper blades on a Citroen C3. Take the front wiper blade (to be replaced) with your hands, gently pull the movable blade as shown …
How to Replace the Front Wiper Blade on a Citroën C3
How to Replace the Front Wiper Blade on a Citroën C3
Citroen C3 (2002-2009 / FC, FN) Before you can begin, you need to exit the cabin of your Citroën C3 and head to the front bonnet of the car. Start by lifting the entire wiper arm, w…
How to Replace the Front Wiper Blades on a Citroen C3
How to Replace the Front Wiper Blades on a Citroen C3
Citroen C3 (2009-2016 / SC) Here’s how to replace the front wiper blades on a Citroen C3. Grab the front wiper arm with your hands, gently pull the movable wiper blade (without …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos