Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stop Bulbs on Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Headlight bulb

Replacing the blown bulbs of the front headlamp on Citroen C3. Here’s how to disassemble the headlamp. Open the boot lid, unscrew the securing screws located above the headlamp using a screwdriver. Remove the plastic cover on the side of the trim and unscrew the lower screws that secure the rear light. Disconnect the rear light from its housing once all screws are removed (unplug the power connectors) and replace the damaged bulbs with new ones (same size and voltage). Refit the light with the associated screws and reconnect the power connectors.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Third Brake Light on Citroen C3
Removing Third Brake Light on Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this brief video tutorial, you will learn how to remove the third brake light on a Citroen C3. First, open the boot lid, and inside the two holes …
How to Disable Start and Stop on a Citroen C3?
How to Disable Start and Stop on a Citroen C3?
Citroen C3 (2009-2016 / SC) On the Citroen C3 shown in the content, disabling the Start & Stop occurs temporarily via the dedicated command on the dashboard or central console. …
How to Replace the Third Brake Light Bulb on a Citroen C3
How to Replace the Third Brake Light Bulb on a Citroen C3
Citroen C3 (2009-2016 / SC) Before starting, open the tailgate of the boot on your Citroen C3. Using a flathead screwdriver and leveraging, start by unclipping the clips that se…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos