Do it yourself
Frequently asked questions about cars and motorcycles

Reset the Warning Light on Citroen C3

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

Reset the service warning light on a Citroen C3? Follow these steps. Turn on the instrument panel and check if the warning light is illuminated.

Switch off the car's instrument panel. Press the fixed button located near the speedometer.

Hold the button until the seconds count down on the display. Switch off the instrument panel after the service reset is complete.

Always remember to make service adjustments with the vehicle stationary and turned off. Turn off the instrument panel again and check if the maintenance light has been reset on the C3.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Citroen C3 (2016-2023 / SY, SX) In today's video, understand the necessary instructions to reset the tyre pressure warning light on the Citroen C3 third series; before performing th…
Citroen C3 (2009-2016 / SC) Punctured or deflated tire, with the relative warning light on the instrument panel of your Citroen C3, car shown in the attached video? The inconven…
Citroen C3 (2016-2023 / SY, SX) When your Citroen C3 requests a service, do not ignore this warning: it is a safety alert for you and others. After completing all necessary checks, …

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos