Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Fan Repair on Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Blower motor

Remove the lower cover located on the driver's side, the cover behind the pedals. Once removed, you will notice a connector going to the fan with two green terminals. Given the poor working position, use a flat-head screwdriver to reach that connector and loosen the two terminals (you need to pry on the tab). Then, using a T20 Torx bit, unscrew the screw located under the connector. At this point, you can detach the resistor unit and replace it with a new one you have purchased. It costs very little and can be found online. Proceed in reverse for reassembly.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Fan from the Citroen C3
Removing the Cabin Fan from the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today's instructions will illustrate how to remove and replace the cabin fan from the Citroen C3, following these simple steps. First, get inside the…
How to replace the cabin fan of the Citroen C3
How to replace the cabin fan of the Citroen C3
Citroen C3 (2009-2016 / SC) Today we will see the instructions that will allow us to disassemble and replace the cabin fan of the Citroen C3, in simple steps. First of all, we g…
How to Replace the Fan on a Citroen C3
How to Replace the Fan on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How to replace the fan on a Citroen C3. Follow this guide to perform the disassembly. Remove the plastic cover under the glove compartment using a le…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos