Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C1
    4. : When and how to replace the service belt on Citroen cars?

Citroen C1 - Video tutorial

Model: Citroen C1 MK 2 - Years 2014-2022
Part: V-belt
Operation: When and how to replace the service belt on Citroen cars?

To find out when to replace the service belt, you must always look at the use and maintenance booklet, where it is written, but usually this maintenance is carried out when the vehicle reaches 120,000 km or after six years of use of the vehicle. After disconnecting the battery, lift the car and remove the right front wheel. Remove the fender by unscrewing all the bolts, as shown in the video. Once this is done you will have access to the service belt: slightly loosen the 12 mm bolt of the belt tensioner and the upper screw of the 14 mm support. With 10 and 12 wrenches lock the lock nut and loosen the nut of the belt tensioner, remove the belt and replace it. Proceed backwards for assembly.


Posted on 4 February 2024 by ScegliAuto



When to change the timing belt on Citroen C1?
Citroen C1 (2005-2014 / MK 1) The timing belt is one of the most important and often overlooked components within a vehicle’s mechanical package. An integral part of the ordinar
How do you replace the V-belt on the Citroà «n C1?
Citroen C1 (2005-2014 / MK 1) In order to replace the V-belt of the Citroà «n C1 you have to go and lift the car so that you can unscrew the bolts securing the right front wheel.
How to deactivate the seat belt alarm on the Citroen C1
Citroen C1 (2014-2022 / MK 2) To deactivate the acoustic system of the seat belts on a Citroen C1 vehicle, first turn on the instrument panel and then press the button located on

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos