Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When and how to replace the timing chain of the Citroen C1 1.0

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Timing belt

Today's information will show us how to disassemble and replace the timing chain on the Citroen C1 1.0 petrol engine, as well as on the Peugeot 107 and Toyota Aygo; on this type of engine, the timing chain should be replaced around 100,000 kilometers. To disassemble the timing chain, it will be necessary to remove the cylinder head cover, then remove the engine support and the V-belt, as shown in the video. At this point, we remove the distribution cover and take the necessary references for the subsequent timing of the engine, following the video tutorial until the end!

Posted on 4 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on a Citroën C1
How to Replace the Remote Battery on a Citroën C1
Citroen C1 (2005-2014 / MK 1) To replace the remote battery on a Citroën C1, lift the ignition key by pressing the button located at the top of the device. Once the key is raised,…
When and how to replace the auxiliary belt on a Citroen car?
When and how to replace the auxiliary belt on a Citroen car?
Citroen C1 (2014-2022 / MK 2) To know when to replace the auxiliary belt, always check the owner's manual, which specifies the interval. Typically, this maintenance is performed a…
How to deactivate the seat belt alarm on the Citroen C1
How to deactivate the seat belt alarm on the Citroen C1
Citroen C1 (2014-2022 / MK 2) To deactivate the acoustic system of the seat belts on a Citroen C1 vehicle, first turn on the instrument panel and then press the button located on …

Other guides you may be interested in

    Frequently Asked Questions

    • C1 2005-2014 - How many km do you replace the Citroen C1 timing chain? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos