Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Number Plate Light on a Citroen C1

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: License plate light

See other generations:
Video tutorial

Start by exiting the cabin of your Citroen C1 and heading to the rear number plate. Next, unclip the number plate light frame using a flathead screwdriver and remove it from its housing.

Once done, disconnect the bulb's electrical connector. After disconnecting the connector, remove the bulb, and the disassembly will be correctly completed.

To fit the new number plate bulb on your Citroen C1, follow this procedure in reverse, and you will have completed the replacement.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to replace the license plate light of the Citroen C1
How to replace the license plate light of the Citroen C1
Citroen C1 (2005-2014 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the license plate bulbs of the Citroen C1, as well as the Peuge…
How to Remove the Rear Light of the Citroen C1
How to Remove the Rear Light of the Citroen C1
Citroen C1 (2005-2014 / MK 1) Remove the rear light of the Citroen C1? Lift the boot and start disassembling the light. Use a screwdriver to remove the securing screws located at …
How to Remove the Stop Light Bulb from a Citroen C1
How to Remove the Stop Light Bulb from a Citroen C1
Citroen C1 (2005-2014 / MK 1) Before you begin, open the boot of your Citroen C1. Start by unscrewing and removing the screws that secure the rear light to the car's frame. Next, …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos