Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light of the Citroen C1

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: License plate light

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the license plate bulbs of the Citroen C1, as well as the Peugeot 107 and the Toyota Aygo. First of all, let's move to the rear part of the car and start by removing the small license plate light fixture, levering on the sides; disconnect the electrical connector and remove the small bulb from the bulb holder, as shown in the video.

At this point, install the new license plate bulb, of the correct type and with the same fitting; reassemble the bulb holder and the fixture, securing it properly!


Posted on 11 March 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Number Plate Light on a Citroen C1
How to Replace the Rear Number Plate Light on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Start by exiting the cabin of your Citroen C1 and heading to the rear number plate. Next, unclip the number plate light frame using a flathead screwd…
How to Replace the Headlights on the Citroen C1?
Citroen C1 (2005-2014 / MK 1) Replacing the front lighting of a vehicle, this also applies to the Citroen C1 shown in the video presentation available, is usually prompted by unfo…
Replacing the Rear Light Bulb of the Citroen C1 MK2
Replacing the Rear Light Bulb of the Citroen C1 MK2
Citroen C1 (2014-2022 / MK 2) In this video, you will see how to replace one of the bulbs in the rear light of the Citroen C1 MK2 that has blown. Open the tailgate of the boot, po…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos