Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlights on the Citroen C1?

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
This video is currently unavailable

Replacing the front lighting of a vehicle, this also applies to the Citroen C1 shown in the video presentation available, is usually prompted by unforeseen needs, breakages due to an impact, or if you want to treat the same headlights against yellowing, etc. The disassembly does not involve complex work; disconnect the rear connectors of the electrical wires supplying the bulbs, then unscrew the retaining pins at the bottom, top, and rear, the last of which can be accessed by removing the wheel arch liner.


Posted on 15 June 2026 by ScegliAuto


Related tutorials

Removing Front Wing on Citroen C1
Removing Front Wing on Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video tutorial, we will see the instructions on how to remove the side wing of a first-generation Citroen C1. First, open the bonnet of your …
How to Replace the Wiper Blades on a Citroën C1
How to Replace the Wiper Blades on a Citroën C1
Citroen C1 (2005-2014 / MK 1) To replace the wiper blades on a Citroën C1, lift them so that they are not in contact with the windscreen; this will allow you to angle the blades r…
Replacing Headlight Bulbs on a Citroen C1
Replacing Headlight Bulbs on a Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video tutorial, see how to replace the headlight bulbs on a first-generation Citroen C1. First, switch off the vehicle and open the bonnet. T…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos