Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlight Bulbs on a Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Headlight bulb

In this video tutorial, see how to replace the headlight bulbs on a first-generation Citroen C1. First, switch off the vehicle and open the bonnet. To change the main and dipped beam bulb, disconnect the connector and remove the rubber cover, then lower the tab holding the bulb in place to extract and replace it. For the position light, grasp the connector and turn it a quarter turn counterclockwise to remove the bulb and replace it. Finally, for the indicators, grasp the connector and turn it clockwise to detach it; to remove the bulb, press and turn it counterclockwise, then replace it following the reverse procedure.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulbs on a Peugeot Citroen C1
How to Replace the Front Headlamp Bulbs on a Peugeot Citroen C1
Citroen C1 (2005-2014 / MK 1) Learn how to replace the bulbs in the front headlamp on a Peugeot Citroen C1. Open the bonnet by pulling the lever located at the bottom right of the…
How to Change the Front Headlight Bulbs on a Citroen C1
How to Change the Front Headlight Bulbs on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Let's see how to change the front headlight bulbs on a Citroen C1. Open the front bonnet by pulling the lever located at the bottom right of the dash…
How to Change Third Brake Light Bulb on Citroen C1
How to Change Third Brake Light Bulb on Citroen C1
Citroen C1 (2005-2014 / MK 1) Replace the blown bulbs in the third brake light of a Citroen C1. Unscrew the plastic cover to access the third brake light. Remove the protective pl…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos