Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulb of the Citroen C1 MK2

Model: Citroen C1 MK 2 - Years 2014-2022
Part: Tail light bulb

In this video, you will see how to replace one of the bulbs in the rear light of the Citroen C1 MK2 that has blown. Open the tailgate of the boot, position yourself in front of the light containing the bulb to be replaced, and using a spanner, undo the two bolts securing the light. Release it from its housing and disconnect the electrical connector. Rotate the light and, using the four clips, detach the plate containing the bulbs. Once you have identified the bulb to be replaced, remove it by pressing and slightly rotating it. Insert the new bulb using the same procedure. Refit the plate in the light, reconnect the connector, place the light back in its housing, and secure it with the two bolts.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Citroen C1
How to Replace the Rear Light Bulb on a Citroen C1
Citroen C1 (2014-2022 / MK 2) If you intend to change one of the rear light bulbs on your second-generation Citroen C1 yourself, simply follow the steps described in this guide. F…
How to Replace the Front Headlight Bulb of the Citroën C1?
How to Replace the Front Headlight Bulb of the Citroën C1?
Citroen C1 (2005-2014 / MK 1) To replace the front headlight bulb of the Citroën C1, lift the bonnet to access the rear of the headlight corresponding to the bulb to be replaced. …
How to Replace the Front Headlight Bulb on a Citroen C1
How to Replace the Front Headlight Bulb on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Replacing the front headlight bulb on a Citroen C1 is a straightforward task. To do this, you need to: - Open the bonnet; - Disconnect the connector;…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos