Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on a Citroen C1 MK2

Model: Citroen C1 MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

See other generations:
Video tutorial

As soon as you notice that the dipped beam bulb on the Citroen C1 has stopped working, you must replace it as soon as possible to drive safely and avoid fines. To carry out the replacement, open the bonnet of the engine compartment, stand in front of the headlamp containing the burnt-out bulb, and operating from the rear of the lamp, disconnect the electrical connector, remove the rubber cover, unclip the metal retaining clip, and slide out the old bulb.

Insert the new H4 bulb, securing it in the correct position with the metal clip, replace the rubber cover and the electrical connector.


Updated on 29 September 2026 by ScegliAuto


Related tutorials

Replacing the Dipped Beam on a Citroen C1
Replacing the Dipped Beam on a Citroen C1
Citroen C1 (2014-2022 / MK 2) Open the bonnet and place the support rod. Accessing the rear of the headlamp, remove the round cover by simply pulling it off to access the bulb. Di…
How to Replace the Dipped Beam Bulb on a Citroen C1
How to Replace the Dipped Beam Bulb on a Citroen C1
Citroen C1 (2005-2014 / MK 1) This brief video tutorial shows how to replace the dipped beam bulb on a first-generation Citroen C1, produced from 2005 to 2014. First, pull the rel…
Replacing the Front Bulbs on Citroen C1
Replacing the Front Bulbs on Citroen C1
Citroen C1 (2005-2014 / MK 1) Working with the engine off and the handbrake engaged, lift the front bonnet and place the support rod. The video clearly indicates which bulb corres…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos