Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam on a Citroen C1

Model: Citroen C1 MK 2 - Years 2014-2022
Part: Headlight bulb

Open the bonnet and place the support rod. Accessing the rear of the headlamp, remove the round cover by simply pulling it off to access the bulb. Disconnect the connector, lift the small metal clip, and you can extract it. Nothing could be easier! Although this tutorial shows the replacement of the dipped beam, the procedure is almost identical for any front bulb you wish to replace. For reassembly, proceed in reverse: insert the new bulb, close the metal clip, reconnect the connector, and replace the cover.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses on the Citroën C1?
Where Are the Fuses on the Citroën C1?
Citroen C1 (2005-2014 / MK 1) The fuses on the Citroën C1 are contained within dedicated fuse boxes installed in the vehicle: on this model, you can find three fuse boxes. The fir…
Where are the Fuses in the Citroën C1?
Where are the Fuses in the Citroën C1?
Citroen C1 (2005-2014 / MK 1) Any fuse in the Citroën C1 is located inside one of the designated fuse boxes installed in the vehicle: in this model, you can find three boxes for h…
Replacing the Front Bulbs on Citroen C1
Replacing the Front Bulbs on Citroen C1
Citroen C1 (2005-2014 / MK 1) Working with the engine off and the handbrake engaged, lift the front bonnet and place the support rod. The video clearly indicates which bulb corres…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos