Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bulbs on Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Headlight bulb

Working with the engine off and the handbrake engaged, lift the front bonnet and place the support rod. The video clearly indicates which bulb corresponds to the indicator, the dipped beam, and the main beam. To replace the latter two bulbs, disconnect their connector, remove the rubber rear cover, and lift the metal clip, then you can extract the bulb. For the indicator light, simply unscrew the connector slightly and it will come out with the bulb, which you can then extract and replace.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Dipped Beam Bulb on Citroen C1
Replacing Dipped Beam Bulb on Citroen C1
Citroen C1 (2005-2014 / MK 1) How to replace the headlight bulbs on a Citroen C1? Let's see how to remove the damaged bulbs from inside the headlights. Lift the bonnet by pulling …
How to Change Third Brake Light Bulb on Citroen C1
How to Change Third Brake Light Bulb on Citroen C1
Citroen C1 (2005-2014 / MK 1) Replace the blown bulbs in the third brake light of a Citroen C1. Unscrew the plastic cover to access the third brake light. Remove the protective pl…
How to Change the Front Headlight Bulbs on a Citroen C1
How to Change the Front Headlight Bulbs on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Let's see how to change the front headlight bulbs on a Citroen C1. Open the front bonnet by pulling the lever located at the bottom right of the dash…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos