Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C1
    4. : How to proceed by replacing the headlight bulbs on Peugeot Citroen C1

Citroen C1 - Video tutorial

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Headlight bulb
Operation: How to proceed by replacing the headlight bulbs on Peugeot Citroen C1

Let's see together how to replace the bulbs placed in the headlight on Peugeot Citroen C1. We open the bonnet by pulling the lever located at the bottom right of the dashboard, let's put it in safety. We find the inspection cap of the lighthouse (located in the rear part of the lighthouse) and remove it. Once we have reached this point, we will find the bulbs with metal hooks, take out the lamp holders from the lighthouse and go to extract the damaged bulb with the help of a screwdriver. We mount the new bulb and (always suitable type and size) we insert the lamp holder in the lighthouse housing.


Posted on 27 October 2023 by ScegliAuto



How to replace the front headlight bulb of the Citroen C1
Citroen C1 (2005-2014 / MK 1) Replacing the front headlight bulb of the Citroen C1 independently is a very simple operation. To replace the bulb, we need to: -open the hood; -disc
How to change the headlight bulbs on Citroen C1
Citroen C1 (2005-2014 / MK 1) Let's see how to change the headlight bulbs of a Citroen C1. We open the front hood by pulling the lever located at the bottom right of the dashboard
Citroen C1 low beam bulb replacement
Citroen C1 (2005-2014 / MK 1) How to replace the headlight bulbs of a Citroen C1? Let's see how the damaged bulbs are removed from inside the headlights. We raise the front hood b

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos