Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C1
    4. : How to replace the low beam bulb on a Citroen C1.

Citroen C1 - Video tutorial

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Headlight bulb
Operation: How to replace the low beam bulb on a Citroen C1.

Let's see thanks to this short video tutorial how to replace the low beam bulb on a first-generation Citroen C1, a model produced from 2005 to 2014. First, we pull the hood release lever and open it, then we disconnect the bulb connector from the back of the headlight and remove the rubber dust cover. After doing this, we lower the metal tab that holds the bulb in place, so now all we have to do is remove the old bulb and replace it with a new one following the procedure in reverse.


Posted on 16 August 2023 by ScegliAuto



Replacing the front bulbs on Citroen C1
Citroen C1 (2005-2014 / MK 1) When working with the engine off and the handbrake on, lift the front hood and place the appropriate support rod. The video shows you which is the bu
Low beam replacement on Citroen C1
Citroen C1 (2014-2022 / MK 2) Open the hood and put on the special support rod. By accessing the rear of the headlight, remove (by simply pulling it) the round cover which gives a
Replacement headlight bulbs on Citroen C1
Citroen C1 (2005-2014 / MK 1) Let's see in this video tutorial how to replace the headlight bulbs on a first generation Citroen C1. First we turn off the vehicle and open the engi

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos