Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace the original car stereo on the Citroen C3 MK1

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Car stereo
Operation: How to replace the original car stereo on the Citroen C3 MK1

In this video we will show you how to disassemble and replace the original car radio on the Citroen C3 first series, following these simple steps. First of all, let's get on board the car and start immediately by inserting the special tools for extracting the car radios inside the four holes, in order to push and extract the original car radio, as shown in the video. At this point we disconnect the electrical connectors and the antenna cable that we find on the back; then the installation of the new car radio is illustrated, where all the wiring is adapted.


Posted on 16 February 2024 by ScegliAuto

    Frequently Asked Questions

    • C3 2002-2009 - Why is the radio in the Citroen C3 not working? Read Answer
    • C3 2009-2016 - Why is the Citroen C3 car radio not working? Read Answer
    • C3 2009-2016 - What to do if your car radio is blocked in your Citroen C3? Read Answer
    • C3 2016-2023 - Why is the Citroen C3 car's Android system not working? Read Answer
    • C3 2016-2023 - What is wrong with the Citroen C3 Android car radio? Read Answer
    • C3 2016-2023 - What to do if the Citroen C3 display does not turn on? Read Answer
    • C3 2009-2016 - Why does the screen of the Citroen C3 freeze? Read Answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read Answer
    • C3 2016-2023 - What to do in case of a problem with Android Auto on the Citroen C3? Read Answer
    • C3 2016-2023 - Why does the Citroà «n C3 radio not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos