Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulb on a Citroën C2?

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Fog lights

To replace the fog light bulb on a Citroën C2, extract the light from its housing by loosening the screw located on the inside of the bumper, under the optical unit. Once loosened, you can pull out the light, disconnect its connector, and open it. This way, the bulb inside can be removed and replaced with a new part. After replacing the bulb, close the light again, reconnect it to the respective connector, and secure it back in its housing with the previously removed screw.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Citroen C2
How to replace the front headlight bulb of the Citroen C2
Citroen C2 (2003-2010 / MK 1) Today we will see the main instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Citroen C2. Fir…
How to Replace the Rear Light Bulb on a Citroën C2?
How to Replace the Rear Light Bulb on a Citroën C2?
Citroen C2 (2003-2010 / MK 1) To replace the rear light bulb on a Citroën C2, open the tailgate to access the side of the boot corresponding to the light. Here, locate the screw s…
How to replace the headlight bulb of the Citroen C2
How to replace the headlight bulb of the Citroen C2
Citroen C2 (2003-2010 / MK 1) In this article, we will show you how to replace the headlight bulb of the Citroen C2. No tools are needed for this operation. To replace the bulb, f…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos