Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : How to replace the sidelight bulb in Citroen Xsara Picasso?

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Headlight bulb
Operation: How to replace the sidelight bulb in Citroen Xsara Picasso?

Replacing the parking light bulb in the Citroen Xsara Picasso is an extremely simple and quick operation. The replacement bulb in this case must be of the 501 type. As we can see from the attached videotutorial, from the luggage compartment we access the back of the lighthouse, locate the brown bulb holder, grab it and rotate it counterclockwise. If this doesn't seem to come off, let's shake it slightly to disengage it. At this point, it is sufficient to extract the faulty bulb, insert the new spare and reinsert the bulb holder in the frame by turning it clockwise to tighten it.


Posted on 11 March 2024 by ScegliAuto



Removal of Citroen Xsara Picasso bulb
Citroen Xsara Picasso (1999-2012 / MK 1) In this short but effective video we will see how to remove the headlight bulb (high and low beam) of the Citroen Xsara Picasso. The removal of the b
Citroen Xsara Picasso rear light bulb replacement
Citroen Xsara Picasso (1999-2012 / MK 1) Today we will see, in this short video tutorial, how to remove and replace the rear light bulb (brake bulb) of a Citroen Xsara picasso. First we open
Citroen Xsara Picasso rear light bulb replacement
Citroen Xsara Picasso (1999-2012 / MK 1) Let's see in this video how to remove and replace the rear light bulb on a Citroen Xsara Picasso. First of all we open the tailgate of the trunk and

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos