Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Dipped Beam Bulb on the Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

Video tutorial

Discover in this short and simple guide how to remove and replace the dipped beam and main beam bulbs of the front headlight on the Citroen Xsara Picasso. First, open the bonnet of your car and remove the rubber protection cover of the bulbs, disconnecting the electrical connector first; then unclip the metal spring and extract the bulb from its housing, as shown in the video.

Now replace it with a new one of the correct type (in this case, type H4), and reassemble everything by following the reverse procedure!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Replacing Headlight Bulbs on Citroen Xsara Picasso
Replacing Headlight Bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever l…
Where Are the Fuses Located in the Citroën Xsara Picasso?
Where Are the Fuses Located in the Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) Each fuse in the Citroën Xsara Picasso is located inside one of the designated fuse boxes installed in the vehicle: this type of car has two fuse box…
Replacement of the air conditioning control lights of the Citroen Xsara Picasso.
Replacement of the air conditioning control lights of the Citroen Xsara Picasso.
Citroen Xsara Picasso (1999-2012 / MK 1) Today's instructions will show us how to disassemble and replace the bulbs of the air conditioning controls of the Citroen Xsara Picasso. First, we g…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos