Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

DIY Exhaust Repair

Model: Citroen Berlingo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Exhaust muffler

See other generations:
This video is currently unavailable

Over time, exhausts can develop deposits that may lead to rust, holes, and breaks. Here’s how to solve the problem quickly and at minimal cost.

You will need a special product called 'liquid steel', which usually comes in two components that must be mixed before use, a sheet of metal of the appropriate size to cover an area larger than the damaged part, and a metal clamp. Clean the area around the break with a wire brush.

Once the product is prepared, wrap the metal sheet around the exhaust pipe and bend it around to have it ready at the right moment. Apply the product around the break, then position the metal sheet so that it completely covers the broken part and use the metal clamp to tighten it and ensure it adheres to the liquid steel.

Cover any remaining gaps with the product and allow it to dry.


Updated on 1 February 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light on a Citroen Berlingo
How to Reset the Tyre Warning Light on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) There is a DIY procedure for resetting the tyre warning light on a Citroen Berlingo, for which we have a video presentation for those who are not cle…
How to Remove the Seat from a Citroen Berlingo
How to Remove the Seat from a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) There are several reasons for removing the seats from a car, such as the Citroen Berlingo or any other vehicle, including cleaning, repair, or replac…
How to repair the clutch pedal of the Citroen Berlingo
How to repair the clutch pedal of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) The issue we see on this Citroen Berlingo in the video is that the clutch pedal stays down and does not return up by itself. The YouTuber dismantles …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos