Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light

See other generations:
Video tutorial

Before you can start, open the boot lid. This will expose the screws securing the light to the car's frame. Begin by loosening and removing these screws.

Once all screws are removed, proceed to disengage the light from its housing. However, before you can completely remove it, disconnect the rear bulb connector.

Once you have disconnected the connector, the disassembly is complete. To fit the new light, simply follow these instructions in reverse, and you will have successfully completed the replacement.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light on a Citroën C4 Picasso?
How to Remove the Rear Light on a Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) To remove the rear light on a Citroën C4 Picasso, open the rear hatch to access the plastic cover next to the rear light. This cover must be removed …
How to Replace the Rear Light Bulb on a Citroën C4 Picasso
How to Replace the Rear Light Bulb on a Citroën C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) To replace the rear light bulb on a Citroën C4 Picasso, open the rear hatch of the car to access the screws securing the light unit in its housing. O…
How to Replace the Rear Light Bulb on the Citroen C4 Picasso
How to Replace the Rear Light Bulb on the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) This video tutorial explains how to replace the rear light bulb on the Citroen C4 Picasso. To replace it yourself, open the boot and unscrew the scre…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos