Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Citroën C4 Picasso?

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Tail light

To remove the rear light on a Citroën C4 Picasso, open the rear hatch to access the plastic cover next to the rear light. This cover must be removed to access the screws underneath: by unscrewing all three screws, you can free the light from its housing and disconnect the connector at the back. This way, you can connect the new light and secure it in place using the appropriate screws.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear headlight bulbs of the Citroen C4 Picasso MK2
Replacement of the rear headlight bulbs of the Citroen C4 Picasso MK2
Citroen C4 Picasso (2013-2022 / MK 2) If one of the rear lights of the Citroen C4 Picasso were to burn out, change it as soon as possible to ensure safe driving. To replace it, open the r…
How to replace the light bulb in the interior light fixture of the Citroen C4 Picasso
How to replace the light bulb in the interior light fixture of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Today we discover the instructions that will allow us to disassemble and replace the lights or the entire interior light fixture of the Citroen C4 Pi…
How to replace the interior light bulb of the Citroen C4 Picasso
How to replace the interior light bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Replacing the bulb of the interior lights ceiling fixture of the Citroen C4 Picasso is a very simple operation to perform independently. The first th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos