Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Citroen C3 MK3

Model: Citroen C3 SY, SX - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

Follow these simple steps to remove and replace the front headlamp bulbs on a Citroen C3 MK3. First, open the bonnet of your car and start by removing the plastic protection cap of the bulb, located at the back of the headlamp. Next, disconnect the electrical connector of the dipped beam bulb and pull it out to remove it, as shown in the video.

At this point, replace it with a new one of the correct type (in this case, H7). Finally, reassemble everything!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

Replacing a Headlight Bulb on a Citroen C3
Replacing a Headlight Bulb on a Citroen C3
Citroen C3 (2009-2016 / SC) To replace a headlight bulb on a Citroen C3, first ensure the car is parked on a stable and secure surface, then open the front bonnet. Locate the ba…
How to Replace the Front Headlamp Bulb in the Citroën C3?
How to Replace the Front Headlamp Bulb in the Citroën C3?
Citroen C3 (2002-2009 / FC, FN) To replace the front headlamp bulb in the Citroën C3, open the bonnet to access the rear of the headlamp. Here, you will find the connector attached …
How to Replace the Headlight Bulb on a Citroen C3
How to Replace the Headlight Bulb on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Before you begin, open the bonnet of your Citroen C3. Start by unfastening the clip that secures the rear cover of the headlight bulb, then remove th…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos