Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse diagram for the Citroen Jumper

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

The vehicle in question has two fuse boxes. The first is located inside the cabin on the left side of the lower dashboard, near the driver's door, and to access it, you need to remove the two screws on the cover.

The second fuse box is located in the engine compartment on the right side, near the air filter. Below are the main fuses present in the cabin fuse box: right dipped beam, left dipped beam, reverse lights, central locking, third brake light, rear window demister, ABS, windscreen wiper motor.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Fuses Location and Diagram for the Citroën Jumper
Fuses Location and Diagram for the Citroën Jumper
Citroen Jumper (2006-2014 / MK 2) Today's main instructions will illustrate the positioning of the fuse boxes and how to find their diagram for the Citroën Jumper. First, open the dri…
Fuse box schema and positioning of the Citroen Jumper
Fuse box schema and positioning of the Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) Today we will see the information regarding the layout and positioning of the fuse boxes of the Citroen Jumper. First, we climb aboard the cabin and …
Positioning and internal fuse diagram of the Citroen Jumper
Positioning and internal fuse diagram of the Citroen Jumper
Citroen Jumper (1994-2006 / MK 1) Today we will see the instructions that will allow us to access the internal fuse box of the Citroen Jumper, going to find the diagram and the chart.…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos